Icom IC-M510 DSC Marine Transceiver

The Icom IC-M510 is a comprehensive and advanced VHF marine transceiver. It not only provides basic radio communication functions, but also improves the safety and convenience of marine communications by integrating AIS receivers, smart device control and a variety of advanced communication technologies. In addition, its waterproof design and durability make it an ideal choice for marine navigation. Whether it is a small yacht or a large ship, the IC-M510 can provide reliable communication support to ensure safe and smooth navigation.

Download Brochure

Icom IC-M510 DSC Marine Transceiver


 

New Stylish Design
The IC-M510 is slim (depth: 53.6 mm; 2.1 in) and easy to install on your boat. Its new stylish design is suitable for panel or trunnion mounting.

 

Color Widescreen LCD Display
The color TFT LCD display offers a viewing angle of nearly 180 degrees. The wide display features high-resolution characters and function icons. The night mode screen ensures good readability in low-light conditions.

 

Integrated AIS Receiver
With its integrated AIS receiver or external NMEA sentences (third-party AIS receivers, transponders)
The IC-M510 can display real-time AIS ship traffic information on the display. You can make individual DSC calls to selected AIS targets directly from the AIS screen.

 

Radio control and intercom via smart device
Control the device IC-M510 wirelessly and remotely via WLAN using the RS-M500 software (for IOS/Android systems). Up to three smart devices can be used as wireless microphones or remote controls in place of a simple microphone. Intercom function between your smart device and the radio is also available.

 

Other Features

  • Active Noise Cancellation
  • NMEA 0183/HS Connectivity
  • Integrated GNSS Receiver
  • (Choice of internal receiver or use optional
  • UX-241 GNSS Antenna)
  • IP68 Advanced Waterproofing
  • (1M water depth for 60 minutes)
  • Automatic Fog Horn Function (requires CT-M500)
  • Voice Scrambler with optional UT-112A
  • AQUAQUAKETM prevents speaker
  • audio quality degradation due to water immersion
  • Supplied speaker microphone,
  • HM-205RB can be connected to the front or rear panel,
  • to meet user requirements.
  • External speaker connection
  • Controlled by COMMANDMICTM HM-195GB/GW
  • Supports 4-bit channels

 

Frequency Range
    Tx
    Rx
    DSC
    AIS1, 2
 
  156.025–157.425 MHz
  156.025–163.275 MHz
  156.525 MHz
  161.975, 162.025 MHz
Usable channels USA, CAN, INT, WX channels
Type of emission 16K0G3E (FM), 16K0G2B (DSC),16K0GXW(AIS)
Power supply requirement 13.8 V DC (11.7–15.9 V DC)
Current drain
    Tx (at 25W output)
    Rx (Maximum audio)
 
  5.5 A
  3.3 A
Operating temperature range –20°C to +60°C; –4°F to +140°F
Antenna Impedance 50Ω (SO-239)
Weight (approximately) 730 g; 1.6 lb

 

Accessories

  • Speaker microphone, HM-205RB
  • Microphone hanger
  • DC power cable
  • Mounting bracket kit

Reviews

There are no reviews yet.

Be the first to review “Icom IC-M510 DSC Marine Transceiver”

Your email address will not be published. Required fields are marked *